Power Distribution Terminal Blocks

Connection Devices

Showing 85–96 of 101 results

  • 0 out of 5

    Power Distribution Terminal Blocks

    Bulletin 1492 Power Distribution Terminal Blocks use standard cross connections to allow power distribution to any number of terminals. Left-, right- and middle-feed configurations are possible.

  • 0 out of 5

    Process IEC Screw-type Terminal Blocks

    Our Bulletin 1492-JP Process IEC Screw-type Terminal Blocks are designed specifically for process marshaling applications to save 45% panel space and improve the performance of signal routing and distribution.

  • 0 out of 5

    Safety Connection Systems

    Our Guardmaster® Safety t-ports/splitters, distribution boxes, shorting plugs, and taps are parts of a quick-disconnect system dedicated to machine safety. GuardLink™ taps connect safety input devices to a GuardLink system, a safety-based communications protocol that links safety to The Connected Enterprise. GuardLink enabled devices offer advanced features and diagnostics that can only be accessed through a GuardLink enabled connection tap.

  • 0 out of 5

    Screw Terminals

    Our Bulletin 871A and 889 Screw Terminals are field-attachable connectors for use with raw cable. Available in male and female versions, these 4- and 5- pin models contain screw terminals for quick and easy assembly of custom cables on the plant floor. They can be straight or right-angled and are available for use with various cable diameters.

  • 0 out of 5

    Sensor IEC Screw-type Terminal Blocks

    Our Bulletin 1492 Sensor IEC Screw-type Terminal Blocks conveniently provide all connections needed for three-wire applications in one terminal block. This design helps you save panel space.

  • 0 out of 5

    Sensor IEC Spring-clamp Terminal Blocks

    Our Bulletin 1492 Sensor IEC Spring-clamp Terminal Blocks are plug-in style blocks that are designed for 3-wire applications. Plug-in terminals are internally jumpered when installed in a bank. They are available with status indicators for 10…30 V voltage ranges.

  • 0 out of 5

    Single-circuit Neutral Disconnect IEC Screw-type Terminal Blocks

    Our Bulletin 1492 Single-circuit Neutral Disconnect IEC Screw-type Terminal Blocks offer increased safety through a disconnect that requires a tool to open or close a circuit. This block is connected to a bus bar that runs the full length of the terminal blocks to a connection block that is mounted further down the rail for an isolated neutral connection.

  • 0 out of 5

    Space-saver Feed-through IEC Screw-type Terminal Blocks

    Our Bulletin 1492 Space-saver Feed-through IEC Screw-type Terminal Blocks are compact terminal blocks with multi-wire capability for single-circuit applications. We offer these terminal blocks in nine colors and several sizes to accommodate your wire range requirements.

  • 0 out of 5

    Space-saver Grounding IEC Screw-type Terminal Blocks

    Our Bulletin 1492 Space-saver Grounding IEC Screw-type Terminal Blocks provide an easy-to-identify, convenient, neatly organized grounding bus that is mounted on the DIN rail.

  • 0 out of 5

    Specialty Feed-through IEC Screw-type Terminal Blocks

    Our Bulletin 1492 Specialty Feed-through IEC Screw-type Terminal Blocks have test plugs and adapters that identify the presence of voltage and perform simple diagnostic measuring of voltage. Feed-through terminal blocks are available with a test plug that breaks the circuit, forcing the current to run through a meter connected to the circuit-break test plug. Make-before-break or break-before-make test plugs can be used with the testing terminal block.

  • 0 out of 5

    Specialty Feed-through IEC Spring-clamp Terminal Blocks

    Our Bulletin 1492 Specialty Feed-through IEC Spring-clamp Terminal Blocks are two-level blocks with a common link connecting the two circuits. This link creates a single block with two connection points on each side.

  • 0 out of 5

    Splitters & Tees

    Our splitters & tees are designed for use with dual input distribution boxes and MaXum™ distributed I/O. Splitters and tees allow two field devices to be interfaced with a single I/O port. The polyurethane (PUR) insulated body offers resistance to oil and chemicals. The ratcheting coupling nuts provide superior vibration resistance.