Showing 37–48 of 935 results

  • 0 out of 5

    1769 Compact I/O Modules

    Our Bulletin 1769 Compact I/O™ Chassis-Based Modules can be used as local and distributed I/O for a CompactLogix™ or Compact GuardLogix® controller. Rack-type features in a rackless design lower costs and reduce replacement parts inventory. A built-in removable terminal block provides connections to I/O sensors and actuators.

  • 0 out of 5

    1769 CompactLogix 5370 Controllers

    Our Bulletin 1769 CompactLogix™ 5370 Controllers are part of the Integrated Architecture® system. These controllers include integrated safety, and use the same programming software, network protocol, and information capabilities as all Logix controllers. This provides a common development environment for all control disciplines. Consistent tools and features help users to lower engineering investment costs, ease diagnostics and troubleshooting, and speed up time to market for small to mid-size applications.

  • 0 out of 5

    1769 CompactLogix L3x Controllers

    Our Bulletin 1769 CompactLogix™ L3x controllers are ideal for small to mid-size control applications that don’t require motion or safety functionality. These controllers offer integrated serial, EtherNet/IP™, or ControlNet™ channels; and modular DeviceNet™ communications.

  • 0 out of 5

    18 mm LaserSight Photoelectric Laser Sensors

    Bulletin 42CM 18 mm LaserSight™ Photoelectric Laser Sensors is a family of general purpose photoelectric sensors for heavy duty industrial applications. They are packaged in an industry standard 18 mm cylindrical housing. Five sensing modes include transmitted beam, diffuse, retro-reflective, polarized retro-reflective, and background suppression, so you can use these sensors in a variety of complex applications.

  • 0 out of 5

    18 mm Metal General Purpose Sensors

    Bulletin 42CM 18mm Metal Cylindrical General Purpose Sensors are intended for heavy duty industrial applications requiring an industry standard 18 mm cylindrical housing. Five possible modes of sensing include transmitted beam, diffuse, retro-reflective, polarized retro-reflective, and background suppression, allowing the 42CM to be used in a variety of complex applications. Outputs are short-circuit protected to provide continuous operation even under unexpected conditions.

  • 0 out of 5

    18 mm Plastic General Purpose Sensors

    Bulletin 42CA 18 mm Plastic Cylindrical General Purpose Sensors are ideal for light- to medium-duty industrial applications. These sensors flash an indicator if the signal level is too close to the detection threshold. This helps you align the sensor and warns against detection of a background or degradation of the application characteristics.

  • 0 out of 5

    194U Non-fused Rotary Disconnect Switches

    Our 194U Rotary Disconnect Switches offer a variety of non-fused versions from 30…160, that permit the use of your own fuse blocks. Designed for global applications, the 194U provides main disconnecting means for the panel in a compact footprint.

  • 0 out of 5

    22 mm Assembled Stations

    Our 22 mm Assembled Stations include die cast aluminum, enclosed,and pendant options.

  • 0 out of 5

    22 mm Metal Safety Limit Switches

    Our Bulletin 440P 22 mm Metal Safety Limit Switches have a small metal case and a choice of actuator heads. All units are supplied with an integral two meter cable. These switches conform to EN 50047.

  • 0 out of 5

    22 mm Plastic Safety Limit Switches

    Our Bulletin 440P 22 mm Plastic Safety Limit Switches have a range of options including snap action, slow break/make with 2 or 3 contact configurations, and a choice of actuator heads. You can rotate the head in 90° increments before installation for easy mounting. These switches conform to EN 50047.

  • 0 out of 5

    30 mm Metal Safety Limit Switches

    Our Bulletin 440P 30 mm Metal Safety Limit Switches have a range of options including snap action, slow break/make with 2, 3, or 4 contact configurations, and a choice of actuator heads. You can rotate the head in 90° increments before installation for easy mounting. These switches conform to EN 50047.

  • 0 out of 5

    4-Way Redundant Intelligent Fieldbus Junction Box

    Our Bulletin 1788 4-way Redundant Intelligent Fieldbus Junction Box provides a simple, redundant, and fault-tolerant method for connecting field devices to a Profibus-PA or FOUNDATION Fieldbus (H1) network. The unit provides segment protection to four field device drop-line ports by continuously monitoring drop currents and disconnecting a faulty drop to protect the rest of the segment when a fault is detected. Trunk monitoring in redundant configurations enables the rerouting of trunk messages around cable faults.